Carving Machine CV-01

Where can I buy this carving machine for own use?

 

You can buy from our resellers.

 

GS TECHNOLOGY SRL (Argentina)

 

 

FAQ

 

1.How large is the format of CV-01 carving machine?
   170*200mm.

 

2.What is the laser power of CV-01 carving machine?
   1.6W

 

3.  What file formats does the CrealityLaser software support?
3. .svg / .jpg / .png / .bmp

 

4 .What happens if the CV-01 carving machine is powered off during work?
4 . When the power is cut off during the engraving task, the laser head will stay in the original position. When it is turned on again, the task will continue to be executed.

 

5.Why can't the pattern be carved at all?

5 . Please refer to user manual. Make sure the laser head is focusing engraving, and the power and speed have been set correctly.

6 . How can I set focusing for CV-01 Carving Machine?

6 . Put on goggles, after the machine previews processing area, put focusing paper on the material under laser module, adjust the focus of the laser by adjusting the knob on laser head (as shown in the figure below). When the spot on focusing paper is the smallest, adjustment is complete and focusing paper can be removed.